YSI MultiLab handleiding
Handleiding
Je bekijkt pagina 5 van 28
IDS WA System General information
ba76199e03 08/2018 5
1 General information
The IDS WA System is an accessory for IDS measuring systems enabling a wire-
less connection between any IDS sensor with plug head connector (variant W) and
your IDS meter.
Two adapters, one at the IDS meter (IDS WA-M) and one at the sensor (IDS WA-
S), replace the sensor cable with an energy-saving Bluetooth LE radio connection.
The sensor is supplied with power by a rechargeable battery in the IDS WA-S
adapter. The battery is charged with the charging device included in the IDS WA
System (IDS WA-S Charger).
To upgrade the IDS WA System, equip further IDS sensors with the IDS WA-S
adapter, which is available as an accessory.
1 IDS WA-M adapter (on the meter)
With an IDS WA-M adapter connected, the IDS meter registers up to 6
wireless sensors within a radius of up to 10 meters. The administering of
the sensors is done in the Sensors menu.
2 Wireless sensor
Unit of IDS WA-S adapter (3) and IDS sensor (4)
3 IDS WA-S adapter (connected to the sensor)
4 IDS sensor with plug head connector (variant W)
5 Sensors registered and selected for the measured value display (max. 3,
corresponding to the number of sensor connections / channels on the
meter).
6 Sensors registered but not selected for the measured value display.
2
1
3
6
1
5
6
2
3
4
Bekijk gratis de handleiding van YSI MultiLab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | MultiLab |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
