YSI MultiLab handleiding
Handleiding
Je bekijkt pagina 20 van 28
What to do if ... IDS WA System
20 ba76199e03 08/2018
7.2 Display of when a sensor is connected
7.3 The battery of the IDS WA-S adapter cannot be charged
– IDS WA-S adapter
or
IDS WA-M adapter
not identified
– Disconnect and reconnect the IDS WA-S adapter to
the sensor.
– Carry out a reset of the IDS WA-S adapter con-
nected to the sensor: Press the function key of the
adapter for more than 8 seconds
– Carry out a reset of the IDS WA-M adapter con-
nected to the meter: Disconnect and reconnect the
adapter to the meter.
– Carry out a reset of the meter (see operating man-
ual of your meter)
– Strong damping of the
radio signal
– Remove any obstacles in the radio link (e.g. doors,
panes etc.)
– Run the meter and sensor at a smaller distance
– Check the signal strength (in the menu Sensors
<F1__>
Cause Remedy
– The maximum number
of sensors or adapters
is exceeded
– Disconnect the IDS sensor
– Disconnect the IDS WA-M adapter
Cause Remedy
– Insufficient contact of the
IDS WA-S adapter in the
charging station
– Clean the contacts
– Fix the adapter with the retaining clip
– Battery exhaustively dis-
charged
– Carry out a reset of the IDS WA-S adapter in the
charging station (IDS WA-S Charger):
Press the function key of the adapter for at least 8
seconds
Cause Remedy
Bekijk gratis de handleiding van YSI MultiLab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | MultiLab |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
