YSI MultiLab handleiding
Handleiding
Je bekijkt pagina 18 van 28
Storing the IDS WA-S adapter IDS WA System
18 ba76199e03 08/2018
4.3 Status LEDs of the IDS WA-S adapter
The IDS WA-S adapter on the sensor indicates its operating condition with colored
LEDs.
5 Storing the IDS WA-S adapter
For storing, put the IDS WA-S adapter with the sensor connected into a IDS WA-S
Charger ready for operation.
The battery of the IDS WA-S adapter is automatically recharged when the charge
becomes less. Thus the wireless sensor is ready for operation at any time.
The IDS WA-S Charger ready for operation can also be used for storing the
wireless sensor for longer periods of time.
This indicating can be switched off in the Sensors menu.
Color Status Meaning
GREEN Flashes Data are exchanged between the sensor and meter.
The LED flashes during each data exchange.
You can switch off the flashing by selecting the connection
status
in the Sensors menu.
RED Flashes
once
The sensor is identified.
The function is started for the selected sensor in the Sensors
menu with
<ENTER>.
BLUE Flashes
once
The measured value was stored in the meter with the function
key of the IDS WA-S adapter and transferred to an interface.
BLUE Flashes A measurement with AutoRead was started with the function
key of the IDS WA-S adapter.
Off - No data exchange, no connection
To store the wireless sensor outside the charging station for longer
periods of time, we recommend you store the IDS WA-S adapter and
sensor separately.
Bekijk gratis de handleiding van YSI MultiLab, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | MultiLab |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1943 MB |
