YSI 2900D handleiding
Handleiding
Je bekijkt pagina 154 van 172
11-11
POSSIBLE CAUSE: Worn sipper pump seals.
ACTION: Replace seals.
SECTION: 9.4.5 Sipper Pump Seal Replacement
SYMPTOM: ERROR: Temperature
POSSIBLE CAUSE: Ambient temperature too cold or hot.
ACTION: Operate at ambient temperatures between 15 and 35°C.
SYMPTOM: Printer Does Not Advance
POSSIBLE CAUSE: Paper or roll jammed.
ACTION: Remove paper cover and clear obstruction. If printer still does not advance, turn
printer off for 30 seconds, then back on.
SYMPTOM: Sipper Does Not Enter Sample module
POSSIBLE CAUSE: Sipper misaligned.
ACTION: Align sipper.
SECTION: 4.5 Align Sipper
11.2.1 2960 Online Monitor
SYMPTOM: Sipper Does Not Enter Monitor Cup
POSSIBLE CAUSE: Sipper misaligned.
ACTION: Align sipper.
SECTION: 6.2 Align Sipper
SYMPTOM: 2900Series Does Not Recognize the Monitor
POSSIBLE CAUSE: USB cable or 2960 power cable not connected.
ACTION: Check 2960 cable connections.
SECTION: 6.1 2960 Installation
SYMPTOM: 2960 Pump is running, but no sample flowing
POSSIBLE CAUSE: Obstruction in the sample tubing or cup.
ACTION: Remove the sample tube connected to the Monitor Cup inlet port while the pump
is running. If fluid flows, the obstruction is in the cup or the waste line. If fluid
does not flow, try "massaging" the tubing to try relieving the blockage. If
unsuccessful, begin disconnecting tubing and forcing air or fluid through with a
syringe until you locate the blockage.
SYMPTOM: Bubbles appear at the top of the Monitor Cup when the Monitor Pump runs
POSSIBLE CAUSE: 2960 pump tubing is not installed properly and fluid in the waste line is trying to
flow backwards.
ACTION: Check 2960 pump tubing installation.
SECTION: 9.6.1 Tubing Replacement, Pump Tubing Replacement
SYMPTOM: Monitor sample results appear to be lower than expected and excess air is
observed in the 2900 Series sample chamber.
POSSIBLE CAUSE: Sipper depth is not set properly at Monitor Cup.
ACTION: Set sipper depth at Monitor Cup.
SECTION: 6.2 Align Sipper
Bekijk gratis de handleiding van YSI 2900D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YSI |
| Model | 2900D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 50780 MB |
