Yato YT-8304 handleiding
Handleiding
Je bekijkt pagina 10 van 40
10
ORIGINAL INSTRUCTIONS
EN
obtain a higher current than the nominal current of the rectifi er, but for a short period. In case the current is applied in the „BOOST”
mode for too long, the temperature limit fuse of the rectifi er will be activated and it will cut off the charging current until the rectifi er
has cooled down. Once the rectifi er has cooled down, the charging process will be automatically reinitiated.
Connect the terminals of the rectifi er to the terminals of the accumulator, make sure the terminal of the rectifi er marked with a „+”
is connected to the terminal of the accumulator marked with a „+” and the terminal of the rectifi er marked with a „-” is connected
to the terminal of the accumulator marked with a „-”.
Connect the plug of the power cord to the power supply socket.
During the process of charging, the value of the current sent to the terminals of the accumulator may be observed on the indicator
in the housing of the rectifi er.
Once the process of charging has concluded, disconnect the plug of the power cord from the power supply socket, and then
disconnect the accumulator from the rectifi er.
MAINTENANCE OF THE DEVICE
The device does not require any special maintenance. A dirty housing should be cleaned with a soft cloth or with a compressed
air jet, whose pressure must not exceed 0.3 MPa.
Check the conditions of the terminals of the conductors before and after each use. Remove any signs of corrosion, which might
disturb the fl ow of the electric current. Avoid contamination of the terminals with the electrolyte from the accumulator, since it would
accelerate the process of corrosion.
The device should be stored in a dry place, away from unauthorised persons, particularly children. Make sure the cables and
conductors are not damaged during storage.
Bekijk gratis de handleiding van Yato YT-8304, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yato |
| Model | YT-8304 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3827 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Orange |
| Ingebouwd display | Nee |
| Gewicht | 11600 g |
| Internationale veiligheidscode (IP) | IP20 |
| Oplaadspanning | 12 - 24 V |
