Yamato Avanti Black R32 YW09T3B Handleiding (78 Pagina's)

Handleiding

Step4: Install Wiring

Step5:

Connecting Refrigerant Pipe

connection pipes

flare nuts

Take down the valve cover

28

Terminal block

Cable clamp

Wiring cover

Wiring diagram

OUTDOOR UNIT INSTALLATION

5.1 Unscrews the valve cover, grasp and press it down gently to take it down(if the valve cover is

applicable).

5.2 Remove the protective caps from the end of valves.

5.3 heck whether there is any sundry on the port of

the connecting pipe and make ensure the port is clean.

5.4 After align the center, rotate the flare nut of the connecting pipe to tighten the nut as tightly as

possible by hand.

5.5 Use a spanner hold the body of the valve and use a torque wrench to tighten the flare nut

according to the torque values in the torque requirements table.

(Refer to the torque requirements table on section INSTALLATION PRECAUTIONS)

Take off the plastic cover in the pipe ports and c

4.1 Use a phillips screwdriver to unscrew wiring cover, grasp and press it down gently to take it down.

4.2 Unscrew the cable clamp and take it down.

4.3 According to the wiring diagram pasted inside the wiring cover, connect the connecting

wires to the corresponding terminals, and ensure all connections are firmly and securely.

4.4 Reinstall the cable clamp and wiring cover.

Note: When connecting the wires of indoor and outdoor units, the power should be cut off.

Bekijk gratis de handleiding van Yamato Avanti Black R32 YW09T3B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.