Handleiding
Je bekijkt pagina 23 van 32
18
Child lock function
button
Press "▲" and "▼" simultaneously to turn on or
turn off child lock function. When child lock func-
tion is on, " " icon is displayed on remote control-
ler. If you operate the remote controller, the " "
icon will blink three times without sending signal to
the unit.
When selecting " " or no display with remote con-
troller, temperature indicator on indoor unit dis-
plays set temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays indoor
ambient temperature.
When selecting " " with remote controller, tem-
perature indicator on indoor unit displays outdoor
ambient temperature.
no display
●
●
●
By pressing this button, you can see indoor set
temperature, indoor ambient temperature or out-
door ambient temperature on indoor unit's display.
The setting on remote controller is selected circu-
larly as below:
●
●
●
●
NOTE
at the same time. If 8°C heating function has been set
under heat mode, press SLEEP button will cancel 8 °C
heating function. If sleep function has been set under
Under 8°C heating function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under 8°C heating function, set temperature can't be ad-
justed. Press "TURBO" button and the remote con-
troller won't send signal.
Sleep function and 8°C heating function can't operate
●
●
●
●
NOTE
heat mode, start up the 8°C heating function will cancel
sleep function.
Under °F temperature display, the remote controller will
display 46°F heating.
Outdoor temperature display is not available for some
models. At that time, indoor unit receives " " sign-
al, while it displays indoor set temperature.
It's defaulted to display set temperature when turning
on the unit. There is no display in the remote control-
ler.
Only for the models whose indoor unit has dual-8 dis-
play.
When selecting displaying of indoor or outdoor ambi-
ent temperature, indoor temperature indicator dis-
plays corresponding temperature and automatically
turn to display set temperature after three or five se-
conds.
8°C heating function
Under heat mode, press "TEMP" and "CLOCK" but-
tons simultaneously to start up or turn off 8°C heat-
ing function. When this function is started up, " "
and "8°C" will be shown on remote controller, and
the air conditioner keep the heating status at 8°C.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit 8°C heating function.
●
●
●
NOTE
Under energy-saving function, fan speed is defaulted
at auto speed and it can't be adjusted.
Under energy-saving function, set temperature can't
be adjusted. Press "TURBO" button and the remote
controller won't send signal.
Sleep function and energy-saving function can't oper-
ate at the same time. If energy-saving function has
been set under cool mode, press SLEEP button will
cancel energy-saving function. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.
combination buttons
Energy-saving function
Function introduction for
Under cooling mode, press "TEMP" and "CLOCK"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "TEMP" and "CLOCK" buttons simultane-
ously again to exit energy-saving function.
Bekijk gratis de handleiding van Yamato Alpin R32 YW24G8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamato |
| Model | Alpin R32 YW24G8 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4059 MB |
