Yamaha WaveRunner VX Limited HO (2025) Handleiding (120 Pagina's)

Handleiding

Watercraft operation

35

To unlock the drive control mode:

(1) Select the drive control mode indicator.

(2) Select the “ ” toggle switch,

and then push the “OK” button on the

touchpad control.

(3) Enter the 4-digit PIN code, and

select “ ”.

EJU45930

Cruise assist

The cruise assist is a function for maintaining

a desired engine speed within a fixed range

while operating the watercraft. Once the

cruise assist is activated, the set engine

speed can be increased or decreased. How-

ever, the adjustment is limited to a maximum

of five increments above or below the initial

cruise assist setting.

TIP

The cruise assist can only be set between en-

gine speeds of approximately 3000 r/min and

approximately 7000 r/min.

Activating and deactivating the cruise as-

sist

Activation of the cruise assist can be con-

firmed by the cruise assist indicator on the

multifunction information center.

To activate the cruise assist:

(1) Operate the throttle lever until the de-

sired engine speed is reached.

(2) When the engine speed reaches the de-

sired cruise assist setting, push the

“CRUISE/NO WAKE” switch. Once the

beeper sounds three times and the

cruise assist indicator is displayed, the

cruise assist is activated.

(3) When the cruise assist is activated, slow-

ly squeeze the throttle lever to keep it

squeezed further than the position at

which the cruise assist was set.

TIP

Check the multifunction information center to

make sure that the cruise assist is activated

before squeezing the throttle lever to the full

throttle position. If the cruise assist is not ac-

1 Cruise assist indicator

2 Cruise assist level

1 “CRUISE/NO WAKE” switch

Cruise Assist +4

21

1

UF7M71E0.book Page 35 Thursday, June 20, 2024 1:26 PM

Bekijk gratis de handleiding van Yamaha WaveRunner VX Limited HO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.