Yamaha WaveRunner VX Limited HO (2025) Handleiding (120 Pagina's)

Handleiding

Watercraft operation

33

Activating and deactivating the no-wake

mode

The activation of the no-wake mode can be

confirmed by the no-wake mode indicator on

the multifunction information center.

To activate the no-wake mode:

(1) Shift into neutral, or release the throttle

lever and let the engine speed return to

idle.

(2) Push and hold the “CRUISE/NO WAKE”

switch. Once the beeper sounds three

times and the no-wake mode indicator is

displayed, the no-wake mode is activat-

ed.

(3) Push the upper side or the lower side of

the “SPEED ADJUST” switch to adjust

the engine speed to three settings: “No

Wake –1”, “No Wake” (standard setting),

and “No Wake +1”.

To deactivate the no-wake mode:

Perform one of the following operations. The

beeper sounds two times and the no-wake

mode indicator disappears when the no-

wake mode is deactivated.

 Push the “CRUISE/NO WAKE” switch.

 Squeeze the throttle lever.

 Squeeze the RiDE lever.

TIP

The no-wake mode is also deactivated when

the engine is stopped.

EJU47501

Drive control mode

The drive control mode is a function for set-

ting the maximum watercraft speed and ac-

celeration for stable towing.

The maximum watercraft speed can be se-

lected from three settings and the accelera-

tion can be selected from two settings.

Activating the drive control mode

Activation of the drive control mode can be

confirmed by the drive control mode indica-

tor on the multifunction information center.

When the drive control mode is activated, the

drive control mode indicator is shown in light

yellow.

1 No-wake mode indicator

2 No-wake mode level

1 “CRUISE/NO WAKE” switch

No Wake

1

1 “SPEED ADJUST” switch

1

UF7M71E0.book Page 33 Thursday, June 20, 2024 1:26 PM

Bekijk gratis de handleiding van Yamaha WaveRunner VX Limited HO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.