Yamaha WaveRunner Superjet (2025) Handleiding (88 Pagina's)

Handleiding

Maintenance

63

(4) Loosen the locknut.

(5) Tighten or loosen the adjusting nut until

the desired amount of friction is ob-

tained.

(6) While holding the adjusting nut with a

wrench, tighten the locknut to the speci-

fied torque.

(7) Securely install the handlebar cover and

the plastic fasteners in their original posi-

tions.

(8) While holding the steering pole, move

the lock pin to the stowed position, and

then lower the steering pole.

EJU3128C

Adjusting the jet thrust nozzle angle

The angle of the jet thrust nozzle can be ad-

justed to two settings to suit operator prefer-

ence.

To adjust the jet thrust nozzle angle:

(1) Pull back the outer sleeve of the steering

cable joint, and then disconnect the joint

from the steering cable pivot bolt.

(2) Remove the steering cable pivot bolt.

(3) Select the nozzle angle, install the steer-

ing cable pivot bolt in the desired posi-

tion (P1 or P2) on the steering column,

and then tighten the bolt to the specified

torque.

TIP

The outermost hole in the steering column

cannot be used.

1 Adjusting nut

2 Locknut

Tightening torque:

Locknut:

28 N·m (2.8 kgf·m, 21 lb·ft)

1

2

1 Steering cable joint

1 Steering cable pivot bolt

2 Steering column

1

2

1

UF4R74E0.book Page 63 Tuesday, June 18, 2024 9:03 AM

Bekijk gratis de handleiding van Yamaha WaveRunner Superjet (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.