Yamaha WaveRunner Superjet (2025) handleiding
Handleiding
Je bekijkt pagina 70 van 88

Care and storage
60
Throttle cable
Steering cable ball joint (handlebar end)
and steering cable inner wire (handlebar
end)
TIP
Disconnect the steering cable (handlebar
end) from the ball joint before lubricating.
Steering cable (jet thrust nozzle end) and
ball joint
TIP
Disconnect the steering cable from the ball
joint before lubricating.
EJU45861
Rustproofing
ECJ01361
Do not run the engine for more than 15
seconds on land without supplying water,
otherwise the engine could overheat.
Spray metallic parts of the hull and engine
with a rust inhibitor.
To rustproof the internal engine compo-
nents:
(1) Remove the hood. (See page 27 for hood
removal and installation procedures.)
(2) While loosening the clamp, remove the
breather hose.
(3) Make sure that the area around the wa-
tercraft is clear, and then start the engine
in a well-ventilated area.
(4) Run the engine at a fast idle.
(5) Quickly spray as much rust inhibitor as
possible into the air intake duct through
the breather hose joint. Keep spraying
until the engine stalls (or a maximum of
15 seconds). WARNING! Do not pour or
spray gasoline, or any substance oth-
er than a rust inhibitor, into the air in-
take duct. Do not spray flammable
Recommended water-resistant grease:
YAMALUBE MARINE GREASE /
Yamalube Grease A
UF4R74E0.book Page 60 Tuesday, June 18, 2024 9:03 AM
Bekijk gratis de handleiding van Yamaha WaveRunner Superjet (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | WaveRunner Superjet (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7476 MB |







