Yamaha WaveRunner Superjet (2025) handleiding

88 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 44 van 88
Operation and handling requirements
34
(5) Remove the hood. (See page 27 for hood
removal and installation procedures.)
(6) Loosen the oil tank filler cap and remove
it, and then wipe the attached dipstick
clean.
(7) Screw the oil tank filler cap into the filler
hole until it stops. Remove the oil tank
filler cap again and make sure that the
engine oil level is between the minimum
and maximum level marks.
(8) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, slowly
add engine oil.
(9) Repeat steps 6–8 until the engine oil is at
the proper level.
(10) Securely install the oil tank filler cap and
turn it until it stops.
(11) Securely install the hood in its original
position.
1 Oil tank filler cap/Dipstick
1 Dipstick
2 Maximum level mark
3 Minimum level mark
1
21 3
UF4R74E0.book Page 34 Tuesday, June 18, 2024 9:03 AM

Bekijk gratis de handleiding van Yamaha WaveRunner Superjet (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkYamaha
ModelWaveRunner Superjet (2025)
CategorieNiet gecategoriseerd
TaalNederlands
Grootte7476 MB