Yamaha WaveRunner JetBlaster PRO (2025) Handleiding (114 Pagina's)

Handleiding

Watercraft operation

31

TIP

If the RiDE lever is squeezed while the throttle

lever is squeezed, the watercraft will slow

down, and once stopped, move in reverse.

To shift into neutral from forward:

(1) Release the throttle lever.

(2) Lightly squeeze and release the RiDE le-

ver. The “N” (neutral) shift indicator will

be displayed.

TIP

If the RiDE lever is squeezed continuously,

the reverse gate will move to the reverse po-

sition.

EJU47682

Electric trim system

The electric trim system is a function for

changing the vertical angle of the jet thrust

nozzle to change the trim angle and perfor-

mance characteristics of the watercraft.

This function can be used only for forward

operation of the watercraft.

TIP

 When the watercraft is moving in reverse or

is in neutral, the jet thrust nozzle will auto-

matically change to the neutral trim setting.

When the watercraft is shifted into forward,

the jet thrust nozzle will automatically

change to the selected trim setting.

 While the watercraft is in neutral, the

“TRIM/T.D.E.” switch controls the forward

and reverse operation of the T.D.E. (thrust

direction enhancer). (See page 33 for infor-

mation on the T.D.E.)

 The watercraft performance characteristics

according to the trim angle change de-

pending on the operating conditions.

1 “F” (Forward position)

14.3v

RPM

x1000

km/h

1

1 “N” (Neutral position)

14.3v

RPM

x 1000

km/h

1

UF5R70E0.book Page 31 Friday, October 4, 2024 9:02 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster PRO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.