Yamaha WaveRunner JetBlaster PRO (2025) Handleiding (114 Pagina's)

Handleiding

Control function operation

28

is discharged from the cooling water pilot

outlet.

There is a cooling water pilot outlet on the

port (left) side of the watercraft. To check for

proper operation of the cooling system, make

sure that water is being discharged from the

cooling water pilot outlet. If water is not being

discharged from the outlet, stop the engine

and check the jet intake for clogging. (See

page 95 for information on the jet intake.)

TIP

 It will take about 60 seconds for the water

to reach the outlet after the engine is start-

ed.

 Water discharge may not be constant

when the engine is running at idling speed.

If this occurs, apply a little throttle to make

sure that water discharges properly.

EJU40323

Water separator

The water separator prevents water from en-

tering the fuel tank by collecting any water

that has entered the fuel tank breather hose if

the watercraft was capsized.

If water has collected in the water separator,

drain it by loosening the drain screw.

To drain water from the water separator:

(1) Place a drain pan or dry cloth under the

water separator.

(2) Gradually loosen the drain screw to drain

the water. Catch the draining water in the

drain pan or soak it up with the dry cloth

so that it does not spill into the engine

compartment. If any water spills into the

watercraft, be sure to wipe it up with a

dry cloth.

(3) Securely tighten the drain screw until it

stops.

1 Cooling water pilot outlet

1

1 Water separator

2 Drain screw

2

1

UF5R70E0.book Page 28 Friday, October 4, 2024 9:02 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster PRO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.