Yamaha WaveRunner JetBlaster PRO (2025) Handleiding (114 Pagina's)

Handleiding

Control function operation

26

start/stop switch, wait 15 seconds, and then

try again.

The engine will not start under any of the fol-

lowing conditions:

 Lock mode of the Yamaha Security System

has been selected. (See page 25 for

Yamaha Security System setting proce-

dures.)

 Clip is removed from the engine shut-off

switch.

 Throttle lever is squeezed.

 Throttle lever is malfunctioning.

 RiDE lever is squeezed.

 RiDE lever is malfunctioning.

EJU31165

Engine shut-off switch “ ”

The engine shut-off switch automatically

stops the engine when the clip, on the end of

the engine shut-off cord (lanyard), is removed

from the switch, such as if the operator falls

off the watercraft.

Insert the clip under the engine shut-off

switch before starting the engine.

When the engine is not running, remove the

clip from the engine shut-off switch to pre-

vent accidental starting or unauthorized op-

eration by children or others.

TIP

It is recommended that a spare engine shut-

off cord (lanyard) be stored in the glove com-

partment to allow a passenger to restart the

watercraft if the operator falls from the water-

craft.

EJU31212

Throttle lever

The throttle lever increases the engine speed

when the lever is squeezed.

1 Engine start/stop switch

1

1 Engine shut-off switch

2 Clip

3 Engine shut-off cord (lanyard)

1

2

3

UF5R70E0.book Page 26 Friday, October 4, 2024 9:02 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster PRO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.