Yamaha WaveRunner JetBlaster PRO (2025) Handleiding (114 Pagina's)

Handleiding

Safety information

15

EJU42416

Watercraft characteristics

 Jet thrust turns the watercraft. Releasing

the throttle lever completely produces only

minimum thrust. If you are traveling at

speeds above trolling, you will have rapidly

decreasing ability to steer without throttle.

This model is equipped with the Yamaha

Engine Management System (YEMS) that

includes an off-throttle steering (OTS) sys-

tem. It will activate at planing speeds

should you attempt to steer the watercraft

after releasing the throttle lever. The OTS

system assists in turning by continuing to

supply some thrust while the watercraft is

decelerating, but you can turn more sharp-

ly if you apply throttle while turning the han-

dlebars.

The OTS system does not function below

planing speeds or when the engine is off.

Once the engine slows down, the water-

craft will no longer turn in response to han-

dlebar input until you apply throttle again or

you reach trolling speed.

Practice turning in an open area without

obstacles until you have a good feel for this

maneuver.

 This watercraft is water-jet propelled. The

jet pump is directly connected to the en-

gine. This means that jet thrust will produce

some movement whenever the engine is

running and the “F” (forward) or “R” (re-

verse) shift indicator is displayed. When the

“N” (neutral) shift indicator is displayed, the

forward and reverse thrust are balanced to

help keep the watercraft from moving in ei-

ther direction, although some movement

may occur.

 To avoid rear-end collisions while operat-

ing the watercraft, check behind you be-

fore using the RiDE lever to slow down or

stop the watercraft. Make sure that there

are no obstacles or people behind you be-

fore shifting into reverse.

 Keep away from the intake grate while the

engine is on. Items such as long hair, loose

clothing, or PFD straps can become entan-

gled in moving parts, resulting in severe in-

jury or drowning.

 Never insert any object into the jet thrust

nozzle while the engine is running. Severe

injury or death could result from coming in

contact with the rotating parts of the jet

pump.

 Stop the engine and remove the clip from

the engine shut-off switch before removing

1 “N” (Neutral position)

1 Intake grate

2 Jet thrust nozzle

14.3v

RPM

x 1000

km/h

1

2

UF5R70E0.book Page 15 Friday, October 4, 2024 9:02 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster PRO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.