Yamaha WaveRunner JetBlaster (2025) Handleiding (124 Pagina's)

Handleiding

Pre-operation checks

72

EJU45351

Yamaha Security System check

(JETBLASTER LTD)

Make sure that the Yamaha Security System

operates properly. (See page 25 for Yamaha

Security System setting procedures.)

EJU32667

Engine shut-off cords (lanyards) check

Make sure that the engine shut-off cords (lan-

yards) are not damaged. If the cord is dam-

aged, replace it. WARNING! Never try to

repair the engine shut-off cord (lanyard) or

tie it together. The engine shut-off cord

(lanyard) may not pull free when the oper-

ator falls off, allowing the watercraft to

continue to run and cause an accident.

[EWJ01222]

EJU46050

Switch checks

ECJ01311

Do not run the engine over 4000 r/min on

land. Also, do not run the engine for more

than 15 seconds without supplying water,

otherwise the engine could overheat.

Check the engine start/stop switch and the

engine shut-off switch for proper operation.

(See page 25 for information on operating

each switch.)

To check the operation of the switches:

(1) JETBLASTER LTD: If the lock mode is

selected for the Yamaha Security Sys-

tem setting, select the unlock mode.

(See page 25 for Yamaha Security Sys-

tem setting procedures.)

(2) Push the engine start/stop switch to

make sure that the engine starts.

(3) As soon as the engine starts running,

push the engine start/stop switch to

1 Clip

2 Engine shut-off switch

3 Engine shut-off cord (lanyard)

1 Engine start/stop switch

1

2

3

1

UF5S70E0.book Page 72 Friday, October 11, 2024 9:51 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.