Yamaha WaveRunner JetBlaster (2025) handleiding
Handleiding
Je bekijkt pagina 75 van 124

Operation and handling requirements
63
(5) Remove the seat and seat storage com-
partment. (See page 53 for seat removal
and installation procedures and page 58
for information on the seat storage com-
partment.)
(6) Loosen the oil tank filler cap and remove
it, and then wipe the attached dipstick
clean.
(7) Screw the oil tank filler cap into the filler
hole until it stops. Remove the oil tank
filler cap again and make sure that the
engine oil level is between the minimum
and maximum level marks.
(8) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, slowly
add engine oil.
(9) Repeat steps 6–8 until the engine oil is at
the proper level.
(10) Securely install the oil tank filler cap and
turn it until it stops.
(11) Securely install the seat storage com-
partment and seat in their original posi-
tions.
1 Oil tank filler cap/Dipstick
1 Dipstick
2 Maximum level mark
3 Minimum level mark
1
21 3
UF5S70E0.book Page 63 Friday, October 11, 2024 9:51 AM
Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | WaveRunner JetBlaster (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17131 MB |







