Yamaha WaveRunner JetBlaster (2025) Handleiding (124 Pagina's)

Handleiding

Control function operation

27

The throttle lever returns automatically to its

fully closed (idle) position when released.

EJU43343

RiDE lever (JETBLASTER DLX /

JETBLASTER LTD)

When the RiDE lever is squeezed, the reverse

gate lowers and the watercraft starts moving

in reverse. If the watercraft is moving forward,

the watercraft gradually slows down until it

stops, and then the watercraft starts moving

in reverse.

When the RiDE lever is released, it automati-

cally returns to its fully closed (idle) position

and the reverse gate moves to the neutral po-

sition.

EJU31263

Steering system

By turning the handlebars in the direction you

wish to travel, the angle of the jet thrust noz-

zle is changed, and the direction of the water-

craft is changed accordingly.

Since the strength of the jet thrust determines

the speed and degree of a turn, throttle must

always be applied when attempting a turn,

except at trolling speed.

This model is equipped with the Yamaha En-

gine Management System (YEMS) that in-

cludes an off-throttle steering (OTS) system.

It will activate at planing speeds should you

attempt to steer the watercraft after releasing

the throttle lever. The OTS system assists in

turning by continuing to supply some thrust

while the watercraft is decelerating, but you

can turn more sharply if you apply throttle

while turning the handlebars. The OTS sys-

tem does not function below planing speeds

or when the engine is off. Once the engine

slows down, the watercraft will no longer turn

in response to handlebar input until you apply

throttle again or you reach trolling speed.

1 Throttle lever

1 RiDE lever

1

1 Handlebar

2 Jet thrust nozzle

1

2

UF5S70E0.book Page 27 Friday, October 11, 2024 9:51 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.