Yamaha WaveRunner JetBlaster (2025) Handleiding (124 Pagina's)

Handleiding

Trouble recovery

105

ler, jet pump housing, and jet thrust noz-

zle.

If debris is difficult to remove, consult a

Yamaha dealer.

EJU43473

Raising the reverse gate

(JETBLASTER DLX / JETBLASTER

LTD)

If the RiDE system malfunctions and the re-

verse gate remains in the lowered position,

the watercraft will not be able to move for-

ward.

After raising the reverse gate so that the wa-

tercraft can move forward, immediately re-

turn to shore and have a Yamaha dealer

service the watercraft.

To raise the reverse gate:

(1) Stop the engine and remove the clip from

the engine shut-off switch.

(2) Enter the water and move to the rear of

the watercraft.

(3) Slide the shift rod joint toward the bow,

and then disconnect the shift rod joint

from the ball joint.

(4) Raise the reverse gate to the forward po-

sition.

TIP

 While the shift rod is disconnected, the re-

verse gate will not move to the neutral po-

sition or reverse position even if the RiDE

lever is squeezed.

 If the RiDE lever is squeezed while the shift

rod is disconnected, the watercraft will

move forward.

EJU34642

Jumping the battery

If the watercraft battery has run down, the en-

gine can be started using a 12-volt booster

battery and jumper cables.

EJU46101

Connecting the jumper cables

EWJ01252

To avoid battery explosion and serious

damage to the electrical system:

 Do not reverse the polarity of the jumper

cables when connecting to the batter-

ies.

 Do not connect the negative (–) jumper

cable to the negative (–) terminal of the

watercraft battery.

 Do not touch the positive (+) jumper ca-

ble to the negative (–) jumper cable.

1 Shift rod joint

2 Ball joint

1

2

1 Reverse gate

2 Forward position

1

2

UF5S70E0.book Page 105 Friday, October 11, 2024 9:51 AM

Bekijk gratis de handleiding van Yamaha WaveRunner JetBlaster (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.