Yamaha WaveRunner GP SVHO (2025) Handleiding (122 Pagina's)

Handleiding

Watercraft operation

38

while operating the watercraft. Once the

cruise assist is activated, the set engine

speed can be increased or decreased. How-

ever, the adjustment is limited to a maximum

of five increments above or below the initial

cruise assist setting.

TIP

The cruise assist can only be set between en-

gine speeds of approximately 3000 r/min and

approximately 7000 r/min.

Activating and deactivating the cruise as-

sist

Activation of the cruise assist can be con-

firmed by the cruise assist indicator on the

multifunction information center.

To activate the cruise assist:

(1) Operate the throttle lever until the de-

sired engine speed is reached.

(2) When the engine speed reaches the de-

sired cruise assist setting, push the

“CRUISE/NO WAKE” switch. Once the

beeper sounds three times and the

cruise assist indicator is displayed, the

cruise assist is activated.

(3) When the cruise assist is activated, slow-

ly squeeze the throttle lever to keep it

squeezed further than the position at

which the cruise assist was set.

TIP

Check the multifunction information center to

make sure that the cruise assist is activated

before squeezing the throttle lever to the full

throttle position. If the cruise assist is not ac-

tivated, the engine will respond normally to

the throttle operation.

(4) Once the cruise assist is activated, push

the upper side of the “SPEED ADJUST”

switch to increase the set engine speed

or the lower side of the “SPEED AD-

JUST” switch to decrease the set engine

speed. The engine speed can be

changed in the range of the cruise assist

levels –5 to +5.

1 Cruise assist indicator

2 Cruise assist level

21

Cruise Assist +2

1 “CRUISE/NO WAKE” switch

1

UF4P76E0.book Page 38 Thursday, June 13, 2024 3:38 PM

Bekijk gratis de handleiding van Yamaha WaveRunner GP SVHO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.