Yamaha WaveRunner GP SVHO (2025) Handleiding (122 Pagina's)

Handleiding

Watercraft operation

33

EJU40003

Watercraft operation modes

EJU45892

Reverse assist

The reverse assist is a function for temporar-

ily increasing the engine speed when moving

in reverse, such as to enter the water

smoothly when launching the watercraft from

a trailer.

This function operates after the engine is

started and only if the watercraft is not shifted

into forward.

TIP

Once the watercraft is shifted into forward af-

ter the engine is started, the reverse assist

cannot be operated.

Activating and deactivating the reverse

assist

The activation of the reverse assist can be

confirmed by the reverse assist indicator on

the multifunction information center.

To activate the reverse assist:

(1) Start the engine.

(2) Squeeze the RiDE lever to the fully open

position, and then push the upper side of

the “SPEED ADJUST” switch. Once the

beeper sounds three times and the re-

verse assist indicator is displayed, the

engine speed will increase. The engine

speed can be adjusted to two levels: +1

and +2.

To deactivate the reverse assist:

Perform one of the following operations. The

beeper sounds two times and the reverse as-

sist indicator disappears when the reverse

assist is deactivated.

 Relax your grip on the RiDE lever.

 Push the lower side of the “SPEED AD-

JUST” switch when the reverse assist level

is set to +1.

 Squeeze the throttle lever.

EJU45900

T.D.E. (thrust directional enhancer)

The T.D.E. is a function for slightly lifting or

lowering the reverse gate from the neutral po-

sition to operate the watercraft at very low

speeds when the engine is running at idling

speed.

1 Reverse assist indicator

2 Reverse assist level

21

Reverse Assist +2

1 RiDE lever

1 “SPEED ADJUST” switch

1

UF4P76E0.book Page 33 Thursday, June 13, 2024 3:38 PM

Bekijk gratis de handleiding van Yamaha WaveRunner GP SVHO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.