Yamaha WaveRunner GP SVHO (2025) handleiding
Handleiding
Je bekijkt pagina 40 van 122

Control function operation
27
bars may suddenly change position,
which may lead to an accident.
[EWJ00042]
(2) Make sure that the tilt lever returns to its
original position and that the handlebars
are securely locked in place.
EJU41801
Cooling water pilot outlets
When the engine is running, some of the
cooling water that is circulated in the engine
is discharged from the cooling water pilot
outlets.
There are cooling water pilot outlets on the
port (left) and starboard (right) sides of the
watercraft. To check for proper operation of
the cooling system, make sure that water is
being discharged from the port (left) pilot out-
let. If water is not being discharged from the
outlet, stop the engine and check the jet in-
take for clogging. (See page 103 for informa-
tion on the jet intake.)
TIP
It will take about 60 seconds for the water
to reach the outlets after the engine is start-
ed.
Water discharge may not be constant
when the engine is running at idling speed.
If this occurs, apply a little throttle to make
sure that water discharges properly.
EJU40323
Water separator
The water separator prevents water from en-
tering the fuel tank by collecting any water
that has entered the fuel tank breather hose if
the watercraft was capsized.
If water has collected in the water separator,
drain it by loosening the drain screw.
1 Tilt lever
1
1 Cooling water pilot outlet
1
UF4P76E0.book Page 27 Thursday, June 13, 2024 3:38 PM
Bekijk gratis de handleiding van Yamaha WaveRunner GP SVHO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | WaveRunner GP SVHO (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12417 MB |







