Yamaha WaveRunner FX Limited SVHO (2025) Handleiding (144 Pagina's)

Handleiding

Watercraft operation

36

EJU47362

Drive control mode

The drive control mode is a function for set-

ting the maximum watercraft speed and ac-

celeration for stable towing, and to adjust the

trim angle automatically.

The drive control mode can be selected from

the following.

 “”

TIP

 The watercraft speed setting is a target val-

ue. The actual watercraft speed may vary

depending on the operating conditions.

 “ ” and “ ” cannot

change the speed and acceleration.

 The color theme is changed depending on

the selected mode.

Activating the drive control mode

Activation of the drive control mode can be

confirmed by the drive control mode indica-

tor on the multifunction information center.

When the drive control mode is activated, the

drive control mode indicator is shown in light

yellow.

To operate the watercraft using the drive

control mode:

(1) Release the throttle lever and let the en-

gine speed return to idle.

(2) Activate each drive control mode.

(3) Squeeze the throttle lever.

Setting the custom mode

The custom mode settings for the maximum

watercraft speed and acceleration are saved.

In addition, the activation and settings of the

custom mode can be locked to prevent oth-

ers from changing them.

When the lock is set, the custom settings

cannot be changed. Release the lock to

change the settings.

To select the maximum watercraft speed

and acceleration settings:

(1) Select “ ” for the maximum watercraft

speed.

(2) Set the desired maximum watercraft

speed, and select “ ”.

1 Drive control mode indicator

OFF

Economy Performance

Comfort

Custom

Tow

F

E

1

1 Maximum watercraft speed

Custom Mode

km/h

MEDIUM

Acceleration

97

OFF

Custom Auto Trim Off

1

UF3X77E0.book Page 36 Tuesday, July 16, 2024 9:57 AM

Bekijk gratis de handleiding van Yamaha WaveRunner FX Limited SVHO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.