Yamaha WaveRunner FX Limited SVHO (2025) Handleiding (144 Pagina's)

Handleiding

Watercraft operation

32

Confirming the trim setting

The trim setting can be confirmed by the trim

setting indicator on the multifunction infor-

mation center.

To change the trim setting:

(1) Shift into forward.

(2) Push the upper side of the “TRIM/T.D.E.”

switch to increase the trim setting and

raise the bow, or push the lower side of

the “TRIM/T.D.E.” switch to decrease the

trim setting and lower the bow. The trim

angle can be adjusted in the range of the

trim settings –2 to +2.

Bow-up positions

The bow will go up, causing the trim angle to

increase.

There is less water resistance, therefore,

straight-ahead acceleration is enhanced.

Bow-down positions

The bow will go down, causing the trim angle

to decrease.

Vertical movement of the bow will be reduced

and the watercraft will get up on plane more

quickly when accelerating.

1 Trim setting indicator

1 “TRIM/T.D.E.” switch

NNW NE

F

E

km/h

RPM

14.2 v

OFF

PM

1

UF3X77E0.book Page 32 Tuesday, July 16, 2024 9:57 AM

Bekijk gratis de handleiding van Yamaha WaveRunner FX Limited SVHO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.