Yamaha WaveRunner FX Cruiser HO (2025) Handleiding (144 Pagina's)

Handleiding

Operation

106

EJU40243

After removing the watercraft from

the water

ECJ01311

Do not run the engine over 4000 r/min on

land. Also, do not run the engine for more

than 15 seconds without supplying water,

otherwise the engine could overheat.

After operating and removing the watercraft

from the water, promptly discharge the re-

maining water from the cooling water pas-

sages.

To discharge water from the cooling wa-

ter passages:

(1) Make sure that the area around the wa-

tercraft is clear, and then start the en-

gine.

(2) Discharge the remaining water out of the

cooling water passages by alternately

squeezing and releasing the throttle lever

quickly for 10 to 15 seconds.

(3) Stop the engine.

UF7K71E0.book Page 106 Friday, July 5, 2024 2:49 PM

Bekijk gratis de handleiding van Yamaha WaveRunner FX Cruiser HO (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.