Yamaha Rio3224-D3 handleiding
Handleiding
Je bekijkt pagina 6 van 44
About Dante
Rio3224-D3 Rio1608-D3 Reference Manual
6
About Dante
This product features Dante technology as a protocol to transmit audio signals. Dante is a
network protocol developed by Audinate. It is designed to transmit multi-channel audio signals
at various sampling and bit rates, as well as device control signals over a single Giga-bit
Ethernet (GbE) network.
It also offers the following advantages:
• Under optimal conditions in a Giga-bit Ethernet environment, you could theoretically
transmit 48 kHz/24-bit audio via up to 512 ins and 512 outs, for a total of 1,024 channels.
• Devices in the network can be detected and set automatically, and device names can be
assigned as desired.
• Dante uses high accuracy network synchronization standards to achieve sample-accurate
playback with extremely low latency and jitter.
• Dante supports redundant connections via primary and secondary circuits to defend
against unforeseen difficulties.
• Connecting a computer to Dante network over Ethernet enables you to directly input or
output audio signals without using any audio interface devices. (Please note that you need
to use Dante Virtual Soundcard or Dante Via.)
• Audio can be transmitted between devices up to 100 m apart using a CAT5e network cable.
However, the maximum practical distance may vary depending on the cable used.
Visit the Audinate website for more details on Dante:
https://www.audinate.com/
More information on Dante is also posted on the Yamaha Pro Audio website:
https://www.yamahaproaudio.com/
This product uses a Dante module provided by Audinate Pty. Ltd.
You can use Dante Controller to display information about the Dante module used in this
product.
Visit the Audinate website for more information on the open-source software license
applicable to each Dante module:
https://www.audinate.com/software-licensing
NOTE
If you are using a Dante network, do not use the network switch EEE function*:
The EEE function may deteriorate the clock synchronization performance and interrupt audio.
Therefore, please note the following:
• If you are using managed switches, turn off the EEE function on all ports used for Dante. Do
not use any switch that does not allow the EEE function to be turned off.
• If using unmanaged switches, do not use switches that support the EEE function. In such
switches, the EEE function cannot be turned off.
* EEE (Energy Efficient Ethernet) is a technology that reduces switch power consumption
during periods of low network traffic. It is also known as Green Ethernet or IEEE802.3az.
Dante Network Settings and Audio Routing
This product does not feature a function that enables you to change Dante network settings,
such as Sample Rate, Latency or Encoding. The Dante network settings will be controlled
from Dante Controller or the supported digital mixers.
For details on Dante network settings, refer to the corresponding owner’s manual for the
supported digital mixer.
The audio inputs to and outputs from multiple Dante devices can be freely routed within a
Dante network.
This means that you will need to make settings that specify the destination to which each
channel's signal will be sent.
Use Dante Controller to specify the Dante network and audio routing settings.
Dante Controller can be downloaded from the following website.
https://www.yamahaproaudio.com/
For details on Dante Controller, refer to the Dante Controller owner's manual on the same
website.
Bekijk gratis de handleiding van Yamaha Rio3224-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | Rio3224-D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5838 MB |
