Yamaha Rio1608-D3 handleiding

44 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 40 van 44
Appendix
Rio3224-D3 Rio1608-D3 Reference Manual
40
Audio Characteristics
During the measurement, the output impedance of the signal generator is 150 Ω. The output
load impedance is 600 Ω. If certain specifications differ between the Rio3224-D3 and the
Rio1608-D3, specifications that apply only to the Rio1608-D3 will be enclosed in parentheses
{ }.
Frequency response
Fs=96 kHz or Fs=48 kHz @20 Hz-20 kHz, reference to the nominal output level @1 kHz
Total harmonic distortion
Fs=96 kHz or Fs=48 kHz
Total harmonic distortion was measured using an 80 kHz, 48 dB/octave low pass filter.
Hum & Noise
Fs=96 kHz or Fs=48 kHz, EIN=Equivalent Input Noise
Ham & noise levels were measured using an A-weight filter.
Dynamic range
Fs=96kHz or 48kHz
Dynamic range was measured using an A-weight filter.
Crosstalk (@1kHz)
Crosstalk was measured using a 22 kHz, 30 dB/octave filter.
Input Output RL Conditions
Min. Typ. Max.
Unit
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω GAIN: +66 dB −1.5 0.0 0.5 dB
INPUT 1-32 {1-16} PHONES 40 Ω GAIN: −6 dB −1.5 0.0 0.5 dB
Input Output RL Conditions
Min. Typ. Max.
Unit
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω +4 dBu@20 Hz-20 kHz,
GAIN: +66 dB
0.15 %
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω +4 dBu@20 Hz-20 kHz,
GAIN:6 dB
0.05 %
INPUT 1-32 {1-16} PHONES 40 Ω 50 mW@1 kHz, PHONES
level control: max
0.15 %
Input Output RL Conditions
Min. Typ. Max.
Unit
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω Rs=150 Ω, GAIN: +66 dB –128
EIN
dBu
–62 dBu
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω Rs=150 Ω, GAIN: –6 dB –91 –88 dBu
All Inputs OUTPUT 1-16 {1-8} 600 Ω Rs=150 Ω, GAIN: –6 dB
Main fader at nominal level
and all INPUT 1-32 {1-16} in
faders at nominal level.
Measured with DM7 (or
DM7 Compact) through
Dante.
–70
{–73}
dBu
-
OUTPUT 1-16 {1-8} 600 Ω Residual output noise,
Main stereo channel off.
Measured with DM7 (or
DM7 Compact) through
Dante.
–93 dBu
-
PHONES 40 Ω Residual output noise,
PHONES level control min.
–94 dBu
Input Output RL Conditions
Min. Typ. Max.
Unit
INPUT 1-32 {1-16} OUTPUT 1-16 {1-8} 600 Ω GAIN: –6 dB 115 dB
- OUTPUT 1-16 {1-8} 600 Ω DA Converter 120 dB
From/To To/From Conditions
Min. Typ. Max.
Unit
INPUT N INPUT (N-1) or (N+1) INPUT 1-32 {1-16}, adjacent inputs,
GAIN: –6 dB
–100 dB
OUTPUT N OUTPUT (N-1) or (N+1) OUTPUT 1-16 {1-8}, input to output –100 dB

Bekijk gratis de handleiding van Yamaha Rio1608-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkYamaha
ModelRio1608-D3
CategorieNiet gecategoriseerd
TaalNederlands
Grootte5838 MB