Yamaha Rio1608-D3 handleiding
Handleiding
Je bekijkt pagina 36 van 44
Appendix
Rio3224-D3 Rio1608-D3 Reference Manual
36
Appendix
Status/Message List
The front panel displays various messages such as SYSTEM, SYNC, errors, warnings,
information, and confirmations. Some SYSTEM or SYNC messages also use the [SYSTEM]
or [SYNC] indicators to indicate the status.
SYSTEM messages
SYSTEM messages, and the [SYSTEM] indicator state (light, flash, off) inform you of the
operating status of the Rio-D3 unit.
NOTE
• The left [SYSTEM] indicator is green and the right one is red.
• The term “Flash x2” means that the indicator flashes twice cyclically, while the term “Flash x3”
means that the indicator flashes 3 times cyclically.
• If the ID is blank in the table below, only the message will appear on the display.
ID
Indication on the
Rio-D3
Indication in
RRemote
Description Possible solution Status indicators
NORMAL --- Operating normally. --- ---
E00-003 DANTE MODULE
ERROR!
DANTE
module error!
An error has
occurred in the Dante
module.
Restart this unit.
E00-004 ILLEGAL MAC
ADDRESS!
(CONTACT US)
Illegal MAC
Address!
Because the MAC
Address setting has
been damaged,
communication is not
possible.
Contact your Yamaha
dealer.
E00-005 UNIT FAN HAS
MALFUNCTIONED!
(CONTACT US)
Unit Fan has
Malfunctioned!
The cooling fan has
stopped.
Check to see if there
is anything stuck in
the fan. If this does
not solve the
problem, contact
your Yamaha dealer.
E00-006 MEMORY ERROR! Memory Error. Failed to read from
non-volatile memory.
Information that was
saved during the
previous operation
was lost. You must
configure the settings
again.
Flash x2Off
Flash x3Off
Flash x2Light
Flash x3Light
E00-009 VERSION
MISMATCH WITH
DANTE MODULE!
Version
mismatch.
The unit's firmware
and the Dante
firmware are not
compatible.
This unit's firmware
and the supported
digital mixer’s
firmware are not
compatible.
Acquire compatible
versions.
---
E00-010 DANTE AUDIO
RESOURCE
OVERFLOW!
DANTE audio
resource
overflow.
The number of Dante
flows has exceeded
the limit.
Re-configure the
Dante audio routing,
for example by
eliminating unneeded
routings, or by using
multicast rather than
unicast to improve
the efficiency.
E00-012 POWER SUPPLY
FAILED!
Power Supply
Failed!
The supply of power
to either power
supply A or B has
been interrupted.
Make sure that the
power supply cables
are connected
properly. If the
problem persists,
contact your Yamaha
dealer.
(Check the power
indicator.)
ID
Indication on the
Rio-D3
Indication in
RRemote
Description Possible solution Status indicators
Light Flash
Bekijk gratis de handleiding van Yamaha Rio1608-D3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | Rio1608-D3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5838 MB |
