Yamaha MY8-LAKE handleiding
Handleiding
Je bekijkt pagina 7 van 33
MY8-LAKE Owner’s Manual 7
Part Names and Functions
1 AES/EBU connector
This is a D-sub 25-pin connector that inputs and outputs eight digital audio signals in AES/
EBU format.
Supported sampling frequencies are 44.1, 48, 88.2, and 96 kHz.
2 NETWORK connector
This is a RJ-45 connector (100 Mbps) that connects to a PC (Lake Controller).
3 LED indicators
• SELECT: The white LED is lit (static) to confirm device selection from within the Lake
Controller software; it flashes when the Lake Controller is communicating with the device,
and is off when neither selection nor communication is occurring.
•
FAULT: The red LED is either lit (static) or flashes to warn that a serious problem is
occurring. A fault can include an internal error, a slipping digital clock, module output
clipping, or a problem on the card interface.
For additional information about LED indications and their meaning, refer to the section
“Problems and Warnings” in the chapter “Appendix.”
•
STATUS: The green LED flashes to indicate that the MY8-LAKE card is correctly booted
and operational; it is lit (static) when the digital input clock is locked.
123
Bekijk gratis de handleiding van Yamaha MY8-LAKE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | MY8-LAKE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4107 MB |
