Yamaha MY16-CII handleiding
Handleiding
Je bekijkt pagina 4 van 22
1. Setup Guide
In order to use the MY16-CII it is first necessary to set the appropriate bundle number and other
CobraNet parameters. This section will describe the procedure for using the CobraNet Manager
to make the initial CobraNet settings for the MY16-CII.
Note: Use the following methods to set up CobraNet devices other than the MY16-CII:
・ Use the DME Designer software to set up the DME8i-C/DME8o-C/DME4io-C.
・ Use the NetworkAmp Manager software to set up the ACU16-C/NHB32-C.
・ Use the on-board rotary switches to set up the MY16-C.
Or use the setup facilities provided for devices not listed above.
1.1. Connections
Begin by making the connections illustrated below in order to set up the CobraNet parameters
using the CobraNet Manager.
These connections are made specifically to set up the CobraNet parameters, and can be
changed later to suit system requirements.
Example 1: Simultaneous Setup of Multiple MY16-CII cards
The switching hub to which the MY16-CII cards are connected is connected to the computer via
an Ethernet straight cable.
Switching Hub
Ethernet Straight Cable
Computer
Figure 1: Connection Example 1
CobraNet Manager Lite for Yamaha Owner’s Manual 4
Bekijk gratis de handleiding van Yamaha MY16-CII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | MY16-CII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3742 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 600 g |
| Breedte | 120 mm |
| Diepte | 200 mm |
| Hoogte | 40 mm |
