Yamaha CTL-BN1 handleiding
Handleiding
Je bekijkt pagina 3 van 17
CTL-BN1 Reference Manual
3
About this product
This programmable button controller is primarily intended for ADECIA devices.
It can be used as a mute button during meetings when placed on the desk or to switch between presets to suit the
purpose of the room.
Supports an Ethernet connection and PoE (Power over Ethernet)
This unit can be incorporated into digital audio network systems such as ADECIA.
Can accommodate devices other than ADECIA
In addition to controlling ADECIA devices (RM-CR, RM-CG, RM-TT, RM-WAP, VXL1-16P and VXC2P), this unit can
send control commands directly to other devices.
Supports multiple installation options
Instead of being installed on a desk, this unit can also be mounted on the wall of the room.
Available utility software
The following utility software can be used to set up and operate this unit according to its use and environment. For
information on what can be done with each software, refer to “Controlling with software” (page 12).
Introduction
RM-CR Device Manager Controls RM-CR as well as devices connected to RM-CR. It is used to register
CTL-BN1 with RM-CR or select commands to be sent from CTL-BN1 to RM-CR.
This software runs on a computer browser.
RM Device Finder This is application software for controlling ADECIA devices on the same network.
It detects the ADECIA devices on the network, displays the Device Manager for
each device, and updates firmware. In addition, it is used to select commands to
be sent from CTL-BN1 to RM-CG, RM-TT, RM-WAP, VXL1-16P or VXC2P, or to
program CTL-BN1 with control commands to be sent to other devices.
Bekijk gratis de handleiding van Yamaha CTL-BN1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yamaha |
| Model | CTL-BN1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1656 MB |
