Yaesu VR-5000 handleiding
Handleiding
Je bekijkt pagina 28 van 64
VR-5000 OPERATING MANUAL26
Alpha-Numeric Memory Recall
You can use the VR-5000’s powerful microprocessor system to search for Memory Chan-
nels according to their alpha-numeric label. In the example below, we shall set up the VR-
5000 to find all channels programmed with “
POLICEPOLICE
POLICEPOLICE
POLICE” as an alpha-numeric label (e.g.
POLICE 1POLICE 1
POLICE 1POLICE 1
POLICE 1,
POLICE 2POLICE 2
POLICE 2POLICE 2
POLICE 2, etc.).
1. Press the
[
V/M
(
MW
)]
key, if needed, to enter the memory mode.
2. Press the
[
WIDTH
(
BS STEP
)]
key to enable setup of Alpha-Numeric Memory Re-
call.
3. Program the alpha-numeric “label” which you wish to recall, using the DIAL knob and
keypad, as described previously. In this case, program “
POLICEPOLICE
POLICEPOLICE
POLICE” as the label.
Note: do not press
[
ENT
(
SET
)]
after completing entry of the desired “label” in this
instance.
4. Press the
[
M/S
(
SUB SET
)
SORT
]
key, which will recall the first memory channel
beginning with “
POLICEPOLICE
POLICEPOLICE
POLICE.” The channel found will appear at the bottom left-hand por-
tion of the display.
5. Press the
[
M/S
(
SUB SET
)
SORT
]
key; you will observe that only channels beginning
with “POLICE” are appearing on the display.
6. When you find the desired memory channel, press the
[
ENT
(
SET
)]
key to recall that
channel.
Important Note: You can recall Memory Channels alpha-numerically using just one or
two letters of a label within above steps. In the above example, if you programmed “PO”
instead of “POLICE,” you could then recall channels such as “PONTIAC,” “PORTER,”
“PORTLAND,” and “POLAND” in addition to “POLICE.” But if you set “POR,” only
“PORTER” and PORTLAND” would be recalled.
PROGRAMMABLE MEMORY RECALL
The VR-5000 can be set up to monitor the activity on as many as 50 memory channels
simultaneously. For example, repeater system owners may wish to observe channel load-
ing on the various repeaters in the system, and the VR-5000 can assist in this effort. A
graphical representation of channel occupancy will be created, called the “PMR Board.”
When you install the memory channels you wish
to observe into the PMR Board, the VR-5000 will
monitor the activity on these channels simulta-
neously via a rapid search function.
Then an “indicator” will appear on the board, as
described below, letting you know that activity was
noted on that channel.
Memory Operation
Bekijk gratis de handleiding van Yaesu VR-5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | VR-5000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8268 MB |
