Yaesu FTA-850L handleiding
Handleiding
Je bekijkt pagina 80 van 96
78
z Setting the scan resume time
You may select a waiting time till the resuming of scan
after the encountered signal disappears (see page 55).
z Setting the operation after stopping a scan
You may select either of the operations below when en-
countering a signal during a scan (see page 55).
Busy Stop ... Stays at the frequency and will not
resume the scan
5sec Stop ... Stays at the frequency for 5 seconds
and then resume the scan
10sec Stop ... Stays at the frequency for 10 seconds
and then resume the scan
z Setting the polled frequency for dual watch
See page 46 for details.
z Setting the transmit frequency during the
NAV band reception
See page 43 for details.
z Setting the frequency step for tuning
See page 49 for details.
z Setting the time-out timer for transmission
See page 47 for details.
z Setting the microphone conguration
See page 48 for details.
z Setting the side tone operation
See page 48 for details.
z Setting the audio lter of the receiver
You may select the operation of the audio lter from
the following 4 types.
Normal ... No ltering
Low Cut ... Cuts o the lower range of sound
High Cut ... Cuts o the higher range of sound
High And Low Cut ... Cuts o the higher and lower
ranges of sound
Bekijk gratis de handleiding van Yaesu FTA-850L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FTA-850L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10888 MB |
