Yaesu FTA-850L handleiding
Handleiding
Je bekijkt pagina 46 van 96
44
4. Enter the transmit frequen-
cy with the keypad.
Note:
Only the COM band frequen-
cies (118.000 - 136.9916 MHz)
can be set as the transmit
frequency.
5. Select “FINISH”
on the
screen
by pressing the
[
▲
]
or
[
▼
]
key, and then press
the
[
ENT
]
key.
The frequency will be deter-
mined and the display will
return to the COMM Setup
menu.
z Activating the split mode
1. Press the
[
FUNC
]
key to display the COMM Func
menu screen.
2. Select “
Split
” on the screen
by pressing the
[
▲
]
or
[
▼
]
key, and then press the
[
ENT
]
key.
The same operation as
above is possible by press-
ing the [3] key.
If “ON” is displayed in the right hand of “Split”,
the FTA-850L are already in the split mode.
The display will return to the
previous screen and the “
±
”
icon, which indicates that
the FTA-850L are in the
split mode, will appear on
the display.
z Operating in the split mode
To transmit a voice call during the NAV band re-
ception, press and hold the PTT switch, and speak
into the microphone. The COM band screen will
be displayed with the frequency you have set.
To exit the split mode, press the
[
ENT
]
key again
in step 2 above.
Bekijk gratis de handleiding van Yaesu FTA-850L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FTA-850L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10888 MB |
