Yaesu FTA-850L handleiding
Handleiding
Je bekijkt pagina 20 van 96
18
• A fully-discharged pack will be charged com-
pletely in 5.5 hours, and then the GREEN indica-
tor on the SBH-11 will glow.
• It takes 10 hours for full charge with the SAD-25
connected to the transceiver directly.
Important Notes:
The SAD-25 is not designed to power the trans-
ceiver for operation (transmission).
Do not leave the charger connected to the trans-
ceiver for continuous periods in excess of 24 hours.
Long term overcharging can degrade the Lithium-ion
battery pack and signicantly shorten its useful life.
Alkaline Battery Tray Installation
The supplied SBT-12 Battery Tray allows operation of
the FTA- 850L using six “AA” size alkaline battery cells.
When installing a cell, insert the (–) end rst, then
press in the (+) end so the cell snaps into place.
Pay attention to the polarity indicated inside the
case.
SBT-12
Alkaline Battery Tray
Battery Charging
If the radio has never been used, or its charge is de-
pleted, it may be charged by connecting the SBH-11
Charger Cradle with the SAD-25 AC Adaptor.
1. Install the Lithium-ion battery pack onto the trans-
ceiver. Ensure that the transceiver is switched o.
2. Referring to the gure at the right, connect the
battery charger plugs.
3. Insert the transceiver into the SBH-11.
SAD-25
SBH-11
You may insert the cable plug of the SAD-25 into
the EXT DC jack located on the right side of the
transceiver directly. In this case, the “ ” icon
will appear in the top right corner of the LCD display.
4. If the transceiver is inserted correctly, the RED
indicator on the SBH-11 will glow.
Bekijk gratis de handleiding van Yaesu FTA-850L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FTA-850L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10888 MB |
