Yaesu FTA-850L handleiding
Handleiding
Je bekijkt pagina 11 van 96
9
When a VOR or ILS signal is received, it automatically switches to the VOR CDI screen or ILS CDI screen
and continues to display while the signal is being received. When there is no signal, it automatically returns
to the previous screen.
VOR CDI Screen (Page 38)
N
3
33
15
21
6
30
12
24
E
W
S
Compass rose
Course indicator
(OBS direction)
Deviation mark
Course deviation needle
OBS (omni bearing selector) value
VOR value
TO/FROM indicator
SOG (speed over ground) value
according to the GPS signal
●
Press the [ENT] key to
return to the previous screen.
If there is a signal, the VOR
CDI screen will be displayed
again after about 15 seconds.
●
Pressing the [COMM] key
does not return to COMM
mode.
●
Press the [MENU] key to
select the desired screen
and press the [ENT] key.
●
Pressing the [BACK] key
does not return to the
previous screen.
To change the screen
ILS CDI Screen (Page 41)
N
3
33
15
21
6
30
12
24
E
W
S
108.500
Compass rose
Course (runway) indicator
Deviation marks for localizer
Height deviation indicator for glide slope
Deviation marks for glide slope
Course deviation needle for localizer
Height deviation indicator for
glide slope
Deviation marks for glide slope
●
Press the [ENT] key to
return to the previous screen.
If there is a signal, the ILS
CDI screen will be displayed
again after about 15 seconds.
●
Pressing the [COMM] key
does not return to COMM
mode.
●
Press the [MENU] key to
select the desired screen
and press the [ENT] key.
●
Pressing the [BACK] key
does not return to the
previous screen.
To change the screen
Bekijk gratis de handleiding van Yaesu FTA-850L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FTA-850L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10888 MB |
