Yaesu FT-847 handleiding
Handleiding
Je bekijkt pagina 33 van 108
31
FT-847 OPERATING MANUAL
OPERATION
OPERATION QUICK START
•
Push in the [POWER] switch. The display should
become illuminated, and operation may now com-
mence.
‚
Rotate the AF (GAIN) control to set the receiver vol-
ume level.
ƒ
Press the [VFO-M] switch, if necessary, to select
the VFO mode of frequency control (either “
A
” or
“
b
” will appear to the right of the Main Frequency
Display field).
„
Press the appropriate Mode switch ([SSB], [CW],
or [FM/AM]) to select the desired operating mode.
Press a particular Mode switch repeatedly to toggle
between the selections available for that mode:
[SSB]: LSB
ó
USB
[CW]: CW/USB
ó
CW/LSB
[FM/AM]: FM
ó
AM
…
Press the [BAND] [p] or [q] keys, as necessary,
to set the desired operating band.
†
Rotate the MAIN VFO Tuning Dial or MEM/VFO
CH knob to select the desired frequency. The
SHUTTLE JOG™ ring may also be turned to the
left or right to change frequency.
‡
To set a frequency directly from the keyboard, press
[ENT], followed by the frequency (enter the deci-
mal point after the “MHz” portion of the frequency),
then push [ENT] to finish your entry.
ˆ
To transmit, press the microphone’s [PTT] switch,
and speak into the microphone in a normal voice
level.
‰
To receive, release the [PTT] switch.
Bekijk gratis de handleiding van Yaesu FT-847, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | FT-847 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17150 MB |
