Yaesu DR-1X handleiding
Handleiding
Je bekijkt pagina 27 van 44
25
Setting the tone signals for analog FM mode
Setting the tone frequency
1 Touch
[
SETUP
]
then touch
[
F
]
.
2 Touch
[
SIGNALING
]
, then touch
[
TONE SQL FREQ
]
.
3 Touch
[
▲
]
or
[
▼
]
.
The set value will change each time
[
▲
]
or
[
▼
]
is touched.
4 Touch
[
BACK
]
3 times.
The setting is determined and the display will return to the operation
mode screen.
z Factory default: 100.0 Hz
z Tone frequencies between 67.0 Hz and 254.1 Hz can be selected.
Setting the DCS code
1 Touch
[
SETUP
]
, then touch
[
F
]
.
2 Touch
[
SIGNALING
]
, then touch
[
DCS CODE
]
.
3 Touch
[
▲
]
or
[
▼
]
.
The set value will change each time
[
▲
]
or
[
▼
]
is touched.
4 Touch
[
BACK
]
3 times.
The setting is determined and the display will return to the operation
mode screen.
z Factory default: 023
z DCS codes between 023 and 754 can be selected.
Setting the TOT (time out timer)
1 Touch
[
SETUP
]
, then touch
[
F
]
, and then touch
[
TIMER
]
.
2 Touch
[
TOT
]
.
The set value will change in the following sequence each time
[
TOT
]
,
[
▲
],
or
[
▼
]
is touched.
à “3 min” à “4 min” à “5 min” à “10 min” à “OFF” à
à “30sec” à “1 min” à “1.5 min” à “2 min” à “2.5 min” à
3 Touch
[
BACK
]
3 times
.
The setting is determined and the display will return to the operation
mode screen.
Factory default: 3 min
Setting the SQL HYSTERESIS
1 Touch
[
SETUP
]
, then touch
[
F
]
, and then touch
[
TIMER
]
.
2 Touch
[
SQL HYSTERESIS
]
.
The set value will change in the following sequence each time
[
SQL
HYSTERESIS], [▲], or [▼] is touched.
à “NORMAL” à “HIGH” à “MAX” à
NORMAL: The squelch open signal level and the squelch close signal
level are the same.
HIGH: The squelch open signal level is higher than the squelch close
signal level. (Makes squelch less likely to close.)
MAX: The squelch open signal level is much higher than the squelch close level. (Makes squelch even
less likely to close.)
3 Touch [BACK
]
3 times
.
The setting is determined and the display will return to the operation mode screen.
Factory default: NORMAL
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN N O U N CE
MODE/REMOTE
DG-ID
ID M ODE
SQL
R-OFF
T-OFF
DEVIATION
WIDE
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN N O U N CE
MODE/REMOTE
DG-ID
ID M ODE
SQL
R-OFF
T-OFF
DEVIATION
WIDE
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN N O U N CE
MODE/REMOTE
DG-ID
ID M ODE
SQL
R-OFF
T-OFF
DEVIATION
WIDE
SETUP
U
P
N
KI
L
N
KI
L
8
7
DO
WN
F
M/V SQL
Tx PWR
HI
BACK
BACK
ID SET
TIMER
ID AN N O U N CE
MODE/REMOTE
DG-ID
ID M ODE
SQL
R-OFF
T-OFF
DEVIATION
WIDE
Bekijk gratis de handleiding van Yaesu DR-1X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Yaesu |
| Model | DR-1X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8036 MB |
