YA-MAN Design Lift YJMD0 handleiding
Handleiding
Je bekijkt pagina 17 van 32
16
How to Use
Set the POWER ON/UP button up to attach the controller.
2
Attach the two controllers to the Stretch
Fit Sheet in Standby Mode.
Do not press any button of the controllers when you attach
them to the Stretch Fit Sheets (There is no right/left distinction
in controllers).
How to apply treatment
Press and hold the POWER ON/UP buttons on the right and left
controllers for 1 second or more to turn on the power.
Check that Standby Mode is displayed.
1
Turn on the device
In Standby Mode, the three display LEDs flash.
The EMS level (intensity) is set to Level 0 (no EMS output)
by default when the standby function is activated.
POWER ON/UP button
LED display
If the center LED flashes when you turn on the power,
the battery charge is low.
LED display Solutions
The center LED
flashes five times
The center LED
flashes twice
Battery is very low. Charge the
battery.
Battery is low. Charge the battery
before the next use.
Bekijk gratis de handleiding van YA-MAN Design Lift YJMD0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YA-MAN |
| Model | Design Lift YJMD0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1995 MB |
