YA-MAN Design Lift YJMD0 handleiding
Handleiding
Je bekijkt pagina 15 van 32
14
Preparation
Charge the Device
Before Use
All the white lamps turn on and then turn off.
Unplug the USB charging cable.
Approx. 2 hours (room temperature approx. 25°C)
Approx. 5 hours
Charging
When charging
is complete
Charging time
Operating time
* Actual charging time and operating time will differ depending upon the remaining battery level
and the charging environment.
ATTENTION
If there is any water droplet or stains on the controllers or charging terminal, please be sure to wipe them dry
before use. Charging the device with water droplets or stains on the device could cause a failure.
Be sure to attach the magnetic charging terminal in the correct
direction. Charging will not begin if the magnetic charging
terminal is attached in a wrong direction.
Fully charge the battery before using the device for the first time
after purchasing.
When using the device for the first time or when the device has not
been used for an period of time, it is possible that you will be able
to use the device for a short time only, even with a full charge. In
such a case, charge the controllers again before using it.
Please use the commercially available AC adapter.
AC adapter*
* The form presented here is for illustration purposes only.
* The AC adapter is not included.
Controller (back side)
USB charging cable
USB charging cable
Controller (back side)
Fully charged
Battery level: low
Flashing
Solid lighting
Bekijk gratis de handleiding van YA-MAN Design Lift YJMD0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | YA-MAN |
| Model | Design Lift YJMD0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1995 MB |
