Xvive U35D handleiding
Handleiding
Je bekijkt pagina 13 van 24
12
Transmitter 1
(Left channel)
Receiver 1
(Left channel)
Receiver 2
(Right channel)
Powered
Loudspeaker
Powered
Loudspeaker
Transmitter 2
(Right channel)
DJ controller,
Mixer or Audio Interface
QUICK START: TWO U35 SETS FOR STEREO / DUAL MONO PA APPLICATIONS
For stereo PA/DJ systems,
connect Transmitter #1 to
the left main XLR output of
the mixer, and connect
Receiver #1 to the XLR
input of the left main
loudspeaker. When you
power them on, set them
both to the same channel.
Then, connect Transmitter
#2 to the right main XLR
output of the mixer, and
connect Receiver #2 to the
XLR input of the right main
loudspeaker. When you
power them on, set them
both to the same channel,
which must be a dierent
channel than set #1.
For mono PA/DJ systems,
connect Transmitter #1 to
the mono main XLR
output of the mixer, and
connect Receiver #1 to the
XLR input of one of the
main loudspeakers. When
you power them on, set
them both to the same
channel.
Then, connect Receiver #2
to the XLR input of the
second main loudspeaker.
When you power it on, set
it to the same channel as
set #1. Both speakers will
receive the same mono
signal.
STEREO SETUP
CHANNELCHANNEL
CH/SCAN
CH/SCAN
Bekijk gratis de handleiding van Xvive U35D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xvive |
| Model | U35D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1582 MB |
