Handleiding
Je bekijkt pagina 5 van 328
EN
Turning the device on or o
• Press the main power switch 9 to turn on the device, then the screen will be lit and the main
power indicator light will light up.
• When this product lasts for 5 minutes without any operation, the LCD display will be
automatically extinguished. When this product is plugged in and unplugged from mains, pv, car
charger or key operation, the LCD display will be lit up automatically. To turn on or o the LCD
display, press the main power switch.
• Press and hold the main power switch to turn o the power station.
• During normal operation (when power is above 5%), the default standby time of the power
station is 2 hours. When the AC output switch is not turned on and there is no charge or
discharge for 2 hours, the product will automatically shut down. The standby time can be set in
app. When the power is 5% or below, the product will be forced to enter the low power mode. In
case of no charge or discharge, the product will adjust the standby time according to the power
and automatically shut down.
• During normal operation, long press the LED light button to disable the automatic shutdown
setting, the battery icon on the screen will start ashing. Long press again to enter the
automatic shutdown setting, and the battery icon will stop ashing. Note that the automatic
shutdown setting is to protect the battery from low power, disabling this setting may damage
the battery life, please use this setting with caution.
LED lights
• Short press the LED light button 2 to switch between four brightness levels, which are low
light, medium light, high light, SOS and light o.
Note: If you need to adjust the AC Hz/Frequency, rst make sure there is no AC input. Then, 2s long
press the AC output button. If the change has been successful, the AC output icon in the display will
ash 3 times.
12V DC output
• After the main power switch is turned on, press the 12V DC output power switch
5 to enable
the DC output port 4 and 6 .
• Press the 12V DC output power switch again to turn it o.
USB output
• USB output 7 and 8 are enabled by default after the power station is turned on.
AC output
• After ensuring that the main power is turned on, short press the AC output power switch 11
to turn on the AC output 10 . Short press the AC output power switch again to turn it o.
• The default standby time of the AC output port is 1 hour. After 1 hour without any load on the
AC output port of this product, the AC output power will be automatically turned o. To turn o
the automatic AC output shutdown setting, long press the LED light button 2 until the battery
icon on the screen will start ashing. This is useful for AC devices that use power below 10W
and pulse working equipment.
• When the AC output is not in use, turn it o to save power consumption.
USE
Bekijk gratis de handleiding van Xtorm XP2W600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xtorm |
| Model | XP2W600 |
| Categorie | powerbank |
| Taal | Nederlands |
| Grootte | 35485 MB |
