Handleiding
Je bekijkt pagina 6 van 10
www.xpower.com
10
HOW TO USE
The timer is designed with two buttons, MODE1 and MODE2,
to control outlets independently and run on a set schedule so
you can start every day with clean air.
8 On/O Settings
Select the TIMER1 or TIMER2 outlet or both to set a
program. You can save up to 8 dierent programs.
Keep pressing PROG to cycle through programs,
including both “ON” and “OFF” times.
Schedule Options
You have the ability to set your desired days, weekend, or
special schedule based on your needs.
FOR MORE DETAILS ON THE TIMER PLEASE REFER TO TIMER MANUAL.
Mon. Wed. & Friday
Tues. Thur. & Sat.
Mon. Tues. & Wed.
Thur. Fri. & Say.
Mon.-Sun.
Mon.-Sun. (Single Days)
Sat.- Sun. Only
Mon.-Fri.
Mon.-Sat. (Sun. Excluded)
RESET: To initiate timer, push button above (R) with a pin to reset.
UNLOCK TIMER: Press TIMER and CLOCK at the same time to unlock.
SET CURRENT DAY: Press and hold CLOCK, then press WEEK until
the desired day of the week is selected and release.
SET CURRENT TIME: Press and hold CLOCK, then press or hold TIME
(check AM/PM).you clock.
PROGRAM TIMER
Press PROG to start setting the program.
Press TIMER to select between MODE1 and MODE2.
Press WEEK to select the day you’re running the system.
Press TIME to set the desired time to run the unit (check AM/PM).
Press PROG to set the “OFF” time. Repeat steps 3 - 4.
Press CLOCK to return to the main screen.
Press or hold MODE1/MODE2 to turn
“ON/OFF” auto programming.
To set a second unit, click PROG until you select “2”and repeat steps 1-7.
1.
2.
3.
4.
5.
6.
7.
8.
Bekijk gratis de handleiding van XPower PSS4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | XPower |
| Model | PSS4 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 7127 MB |
