XPower FC-250D handleiding
Handleiding
Je bekijkt pagina 10 van 28
English - 10
User Maintenance Instructions
(Continued)
Stack Multiple Units
• Stack the Air Circulators on the sides. Align the air
inlets of both Air Circulators.
WARNING
• For model FC-100 / FC-200 Series, DO NOT stack
more than six units of this appliance.
• For model FC-300 / FC-420, DO NOT stack more
than five units of this appliance.
• Stacking function is not secure during
transportation.
!
Troubleshooting Guide
PROBLEM POSSIBLE CAUSE SOLUTION
Air Circulator does
not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The circuit breaker on the
additional electrical receptacle
(Daisy chain) jumps.*
Remove all appliance on
the additional electrical
receptacle and press “Reset”.
The timer switch is set to “0”
position.*
Set the timer switch to “ON”
position.
Unit runs but the
speed is abnormal
Air inlet or air outlet is blocked. Remove blockage.
* These functions do not apply to all models mentioned in this manual.
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
Bekijk gratis de handleiding van XPower FC-250D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | XPower |
| Model | FC-250D |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3060 MB |
