XPower FC-125B handleiding
Handleiding
Je bekijkt pagina 10 van 40
English - 10
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
PROBLEM POSSIBLE CAUSE SOLUTION
Air Circulator does
not start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The timer switch is set to “0”
position.
Set the timer switch to “ON”
position.
Battery is not activated yet. Please charge the battery
until to activate the battery
before the first usage.
Low battery capacity. When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 5:
Charge the Battery.)
Unit runs but the
speed or the sound
is abnormal
Air inlet or air outlet is blocked. Remove blockage.
Low battery capacity. When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 5:
Charge the Battery.)
Troubleshooting Guide
Bekijk gratis de handleiding van XPower FC-125B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | XPower |
| Model | FC-125B |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3809 MB |
