Handleiding
Je bekijkt pagina 15 van 28
15
1. Fully open the door and pull the gasket
out of the gasket channel.
starting at one corner
2. After removing the gasket lay it out on a flat surface to retain its shape.
3. Using clamps to hold it securely in place, position the overlay panel against the door.
4. Using the frame as a guide, drill six (6) pilot holes 1/8” (3mm) in dia. into the finish panel
taking care not to drill through the panel.
5. Using the ST4-30 self-tapping screws provided, fasten the panel to the door frame.
6. Beginning at one corner, re-install the rubber door gasket into the gasket channel.
BEFORE BEGINNING: Attach any handle hardware before mounting the panel to the door frame.
Mounting screw holes are located
in the gasket channel behind the gasket.
SCREW
HOLE
LOCATIONS
S
IMPORTANT NOTE: The back of the panel must be finished to prevent warping and cracking.
WATCH THE INSTALLATION
VIDEO ON OUR CHANNEL
https://youtu.be/EiezTdUrVGI
www.xoappliance.com
Bekijk gratis de handleiding van XO U24BCGOASS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | XO |
| Model | U24BCGOASS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3329 MB |
