Xiaomi G20 handleiding
Handleiding
Je bekijkt pagina 8 van 154
7
3. Rotate counterclockwise to remove the post-filter.
24h
Installing the Filter Assembly
1. Align one end of the filter's handle with the unlocking mark " " and place the filter vertically into the dust
compartment.
2. Hold the handle and turn the filter clockwise until it is secured in place.
3. Insert the pre-filter into place with its front side up.
4. Insert the post-filter into the vacuum cleaner, and turn the post-filter clockwise into position.
5. Reinstall the dust compartment and make sure it is secured into place.
1 2 3
4
Click
This is the front side
of the pre-filter.
5
Post-filter
Filter Assembly
Filter Pre-filter Post-filter
4. Rinse the filter, pre-filter, and post-filter under running tap water until clean, then set them aside to fully dry for at
least 24 hours.
Notes:
• Never soak the pre-filter and post-filter.
• When cleaning the post-filter, rinse it repeatedly and tap its edge lightly to remove any dust and debris until it
is clean.
• Do not clean the pre-filter and post-filter with your hands, a brush, or a sharp object to prevent damage.
• If the suction power is still significantly reduced after the pre-filter and post-filter are cleaned, you can try to
purchase and replace them with genuine ones.
Unlocking Mark
Bekijk gratis de handleiding van Xiaomi G20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xiaomi |
| Model | G20 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 16252 MB |
