Handleiding
Je bekijkt pagina 108 van 129
PrinterMap User Guide
92
Description
The discover process detects PrinterMap is configured to do an IPX network
Discover. The local machine is not configured for IPX/SPX protocol support. The
discover process cannot continue.
System Action
Discover process terminates.
User Action
Verify the PrinterMap discover process is configured correctly and/or the local
machine is properly configured for the IPX protocol before attempting another
PrinterMap discover.
Text
No discover takes place. Check PrinterMap and local machine configuration.
Variables
None
Description
The discover process is initiated but not properly configured. The discover process
cannot continue.
System Action
Discover process terminates.
User Action
Verify the PrinterMap discover process is configured correctly and/or the local
machine is properly configured for the desired discover type. This message is
generated if neither IP nor IPX are selected on the PrinterMap discover
configuration panel.
Text
No printers discovered for local subnet, ip: $ip_address, mask: $mask
Variables
$ip_address - Local machine's IP address
$mask - Local machine's subnet mask
Description
PrinterMap is configured to discover the specified local subnet but no printers are
discovered. This is strictly an informational message. The discover process does
not detect any errors.
System Action
None
User Action
Verify the specified local subnet does have SNMP capable network printers which
should have been discovered. Use the "ping" command from a DOS prompt to
XPD007
XPD008
Bekijk gratis de handleiding van Xerox Phaser 860, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Xerox |
| Model | Phaser 860 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15592 MB |
