Wood's AC Milan 7K WIFI Smart Home Duo handleiding

Airco

Wood's

88 pagina's

PDF beschikbaar

Handleiding

Operating Instructions Operating Instructions

PRODUCT DESCRIPTION

A. Accessories

After unpacking, please check whether

the above-mentioned accessories are

included, and check their purposes in

the installation introduction in this

manual. Accessory No. 6 is already

mounted at the bottom of the back of the

machine.

B. Portable air conditioning

G. Appearance and Function of Remote

Control.

Notes:- Do not drop the remote control.-

Do not place the remote control in a

location exposed to direct sunlight.

A. Operation Introduction

Before starting operations in this section:

1)Place the air conditioner in a place where

you have close access to a grounded

electrical outlet.

2) Install the exhaust hose, and adjust the

window position well.

3) Insert the power cord into a grounded

AC220~240V/50Hz socket;

4) Press the POWER button to turn on the

air-conditioner.

H, I, and K. Installation of exhaust air hose

M) Temporary installation

1. Twist both ends of the exhaust hose

into the Hose connections.

outlet at back of the machine.

3. Put the other end of the exhaust hose

near windowsill.

J&K: Window Slider Kit Installation

The installation manner of window slider

kit is mostly in “horizontal” and

“vertical”. As shown Fig. 5 and Fig.5a,

check the min. and max. size of the

window before the installation.

1. Install the window kit on the window ;

2. Adjust the length of the window slider

kit according to the window width or

3. Attach the hose bracket to the hole in

the window rail

O. Internal Tank “Water Full” Alarm

The water tank inside the machine

has a level monitor that detects

when the tank is full. When the container

automatically and the code E4 is shown on

the display.

(If the water tank is full, please remove

the rubber plug at the bottom of the unit

to drain the water.) We recommend that

alternatively an oven tray.

when the water is full, please remove

the rubber blockage at the bottom of

unit, and all water will be drained

outside.)

Care Instructions And Maintenance

Declaration:

1) Before cleaning, be sure to

disconnect the unit from any electric

supply outlet;

2) Do not use gasoline or other

chemicals to clean the unit;

3) Avoid rinsing water directly on the unit

4) If the machine is damaged, please

contact your dealer

cleaned once every two weeks.

-Dismounting

-Cleaning

detergent in lukewarm water( 40°C ) and

let dry in the shade.

-Mounting

replace the components as they were.

2.Clean the surface with a neutral

detergent and a wet cloth, followed by

drying it with a dry cloth.

E. Before using

Check whether the exhaust hose

has been mounted properly.

Cautions for cooling and

dehumidifying operations:

-When using functions on cooling and

dehumidifying, keep an interval of at

least 3 minutes between each

POWER.

-Power supply meets the

requirements.

-The socket is for AC use.

-Do not share one socket with other

appliances.

-Power supply is

AC220-240V, 50Hz

1. Turn on the unit

a) Plug in, then the unit beeps once, “ “

The power indicator light is on.

b) Press the “ “ button, then the unit is

turned on.

c) The LED displays the room temperature

and under Automatic mode.

panel.

Cooling/Heating

operation

-Press the “Mode” button till the

-Press the “

+” or “-” button to select

the desired room temperature.

(15°C -31°C )

-Press the “Fan Speed” button to

select wind speed.

3. Dehumidifying operation

Press the “Mode” button till the

“Dehumidify” icon appears.

-Automatically set the selected

temperature to current room

temperature minus 2°C .

-Automatically set the fan motor to

LOW wind speed.

4. Fan operation

-Press the “Mode” button till the “Fan”

icon appears.

-Press the “Fan Speed” button to

select wind speed.

FUNCTION OF THE OPERATION MODES AND INSTALLATION DESCRIPTIONS

cleaned regularly; otherwise the

air conditioner might lose capacity

and even be risk serious damage.

3. Product description

1. Exhaust air hose

2. Connection for exhaust air hose to the AC

3. Connection for exhaust air hose to the

window rail

4. Remote control

5. Window rail

6. Water plug

7. Batteries

1. Control panel

2. Cold Air Outlet

3. Signal Receptor

4. Remote Controller

5. Transport Handle

6. Air Outlet Hose

7. Evaporator Air Intake

8. Drainage outlet

1. Product Front picture

1. Product Top Picture

1. Turn the ends of the exhaust hose into the

connections as shown.

1. Exhaust air hose installation instructions

1. Installation instructions for window

rail NOTE! This window rail is not

suitable for all types of windows. We

recommend Wood’s Window sealing kit

(article number: wac_wk) if this rail does

1. Window rail installation proposal

1. Installation instructions for drainage hose

(NOTE! Hose is not included. The nozzle is

adapted for a 10mm device hose)

1. BUTTON

2. BUTTON

Press this button to select the operation

mode.

3. BUTTON

Used to select fan speed in sequence.

4. and SETTING BUTTONS

used to adjust the room temperature and

the timer.

5. BUTTON

Used to set or cancel Mode operation.

6. BUTTON

Used to set automatic OFF and automatic

ON time.

7. BUTTON

Used to set the oscillation / swing

function.

1. Hours/ Temperature up

2. Hours/ Temperature down

3. Automatic, Cooling , Heating

Dehumidifying, Fan Mode

4. Sleep Mode and Child Lock

5. Oscillation/Swing

6. Hours

7. Operating Mode

8. Fan Speed (low/high)

10. Indicator light for selected fan speed

11. Operating indicator (illuminates when the machine is in operation)

12. Indicator lamp for child lock and sleep mode.

13. WiFi

Bekijk gratis de handleiding van Wood's AC Milan 7K WIFI Smart Home Duo, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.